NS0-593資格勉強、NS0-593受験対策解説集

Drag to rearrange sections
HTML/Embedded Content

NS0-593資格勉強, NS0-593受験対策解説集, NS0-593認定資格, NS0-593合格体験記, NS0-593合格率

P.S. JPNTestがGoogle Driveで共有している無料かつ新しいNS0-593ダンプ:https://drive.google.com/open?id=1XRa3jdSKj_AmrZNTmGiIFSYFE1KwbCsJ

NS0-593試験問題は、専門家によって編集され、長年の経験を持つ専門家によって承認されています。言語は理解しやすいため、学習者に障害はありません。Network ApplianceのNS0-593ガイド急流は誰にでも適しています。コンテンツは習得が容易であり、重要な情報を簡素化しました。 NS0-593テストトレントは、より重要な情報を少ない質問と回答で伝え、学習をリラックスして効率的にします。 NS0-593試験問題を使用すると、NS0-593試験に簡単に合格できます。

Network Appliance NS0-593 Exam Syllabus Topics:

Section Weight Objectives
Topic 1: ONTAP Operating System 30% - Troubleshooting OS issues and panic events
- Using support and diagnostic tools
- Upgrades, patching, and configuration issues
- ONTAP architecture and cluster administration
Topic 2: Hardware and Infrastructure 25% - Cluster interconnect and HA configuration
- SP/BMC and management interfaces
- Hardware component troubleshooting
- MetroCluster and FC environments
Topic 3: Performance and Data Protection 20% - Monitoring and optimization techniques
- Software-defined ONTAP solutions
- Performance concepts and bottleneck analysis
- SnapMirror, SnapVault, and replication troubleshooting
Topic 4: Protocols and Data Access 25% - Networking and LIF configuration
- S3 object protocol configuration and troubleshooting
- SAN protocols: iSCSI, Fibre Channel, FCoE
- NAS protocols: NFS, SMB/CIFS

>> NS0-593資格勉強 <<

Network Appliance NS0-593受験対策解説集、NS0-593認定資格

調査によると、当社の高く評価されているNS0-593テスト問題の成功は、簡単に操作できる練習システムへの尽力によるものです。候補者から寄せられたフィードバックのほとんどは、NS0-593ガイド急流が優れたプラクティスとシステムを実装し、より競争力のある新しい製品を発売する能力を強化していることを物語っています。 NS0-593試験ダンプに伴い、Q&Aはそれほど複雑ではありませんが、より重要な情報で受験者を教育します。これにより、NS0-593試験に合格するための知識を深め、自己啓発を強化できます。

Network Appliance NetApp Certified Support Engineer ONTAP Specialist 認定 NS0-593 試験問題 (Q21-Q26):

質問 # 21
A storage administrator reports that a monitoring toot is reporting that the storage controller reads between 90% to 93% CPU use. You run the sysstat -m command against the node in question.

Referring to the exhibit, which statement is correct?

  • A. You should immediately investigate further by gathering perfstat data and opening a support case.
  • B. High network exempt use could be a problem.
  • C. The customer should be advised to exclude certain workflows to reduce use.
  • D. The CPU Is not a first-order monitoring metric for ONTAP.

正解:D

解説:
= CPU utilization in ONTAP is not a linear measure of the system load, nor can it be used alone as a measure of the overall system utilization. ONTAP uses a Coarse Symmetric Multiprocessing (CSMP) design which partitions system functions into logical processing domains, each with its own scheduling rules and resource availability. Therefore, a high CPU utilization does not necessarily indicate a performance problem, unless it is accompanied by other contributing factors such as high latency, low throughput, or high queue depth. ONTAP has several mechanisms to optimize CPU usage and balance the workload across the cores, such as WAFL parallelization, exempt processing, and CPU pinning. The CPU utilization reported by the sysstat command is an average across all cores and domains, and does not reflect the actual CPU activity or availability for each domain. Therefore, the CPU is not a first-order monitoring metric for ONTAP, and other metrics such as latency, throughput, and queue depth should be considered first. Reference = What is CPU utilization in Data ONTAP: Scheduling and Monitoring?, How to measure CPU utilization, What are CPU as a compute resource and the CPU domains in ONTAP 9?, Monitoring CPU utilization before ONTAP upgrade


質問 # 22
You have recently discovered that NetApp ONTAP Cloud Manager is not sending AutoSupport messages to
NetApp.
In this scenario, what would solve this Issue?

  • A. Verify that your AWScredentials are correctly added to Cloud Manager.
  • B. Verify that your NetApp Support site credentials are correctly added to Cloud Manager.
  • C. Verify that the inbound and outbound rules allow AutoSupport on port 80.
  • D. Verify that your data LIFs allow traffic to mysupport .netapp.com on port 443.

正解:D


質問 # 23
You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16 TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400 aggregates to the FAS8300.
In this scenario, which ONTAP license must be added to the cluster to accomplish this task?

  • A. TPM license
  • B. FabricPool license
  • C. VE license
  • D. S3 license

正解:B

解説:
FabricPool is an ONTAP feature that enables tiering of cold data from SSD aggregates to low-cost object storage, either on-premises or in the cloud1. FabricPool requires a license to be installed on the cluster, and the license type depends on the cloud tier being used2. In this scenario, the cloud tier is another ONTAP cluster (FAS8300), which is not supported by the new Cloud Tiering license that is used for most FabricPool configurations3. Therefore, the old FabricPool license that is retained for dark sites or MetroCluster systems using FabricPool Mirror must be used3. The FabricPool license defines the amount of capacity that can be tiered to the cloud tier, and it can be increased by add-on orders4. Reference:
1: FabricPool overview5
2: FabricPool requirements6
3: Install a FabricPool license2
4: ONTAP FabricPool (FP) Licensing Overview1


質問 # 24
You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet trace.
In this scenario, after you generate the packet trace, where do you find the trace file?

  • A. /etc/log/mlog/packet._traces Of all nodes
  • B. /etc/log/packet_traces of the node hosting the LIF
  • C. /vol0/paclcet_traces of the CIFS SVM
  • D. /packet_traces of the node hosting the LIF

正解:B

解説:
According to the NetApp Knowledge Base, packet traces are stored in the /etc/log/packet_traces directory of the node hosting the LIF. This applies to ONTAP 9.10 and above systems. For ONTAP 9.2 to 9.9 systems, the procedure to capture packet traces is similar, but the command syntax is slightly different. For ONTAP pre-9.2 systems, the procedure is different and requires the use of the tcpdump command. Reference = How to capture packet traces on ONTAP 9.10+ systems, How to capture packet traces (tcpdump) on ONTAP 9.2 to 9.9 systems, How to capture packet traces in ONTAP pre-9.2


質問 # 25
You receive the "Unable to connect to the management gateway server"error when trying to connect to a node
management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?

  • A. Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.
  • B. Log in to the service processor and collect the core dumps from the service processor.
  • C. Log in to the clustershell using the node console and collect the core dumps from the clustershell.
  • D. Log in to the systemshell and collect core dumps from thesystemshell.

正解:B


質問 # 26
......

IT領域で仕事しているあなたは、きっとIT認定試験を通して自分の能力を証明したいでしょう。それに、NS0-593認証資格を持っている同僚や知人などますます多くなっているでしょう。そのような状況で、もし一つの資格を持っていないなら他の人に追及できないですから。では、どんな試験を受けるのかは決めましたか。Network Applianceの試験はどうですか。NS0-593認定試験のようなものはどうでしょうか。これは非常に価値がある試験なのですから、きっとあなたが念願を達成するのを助けられます。

NS0-593受験対策解説集: https://jpntest.com/shiken/NS0-593-mondaishu

ちなみに、JPNTest NS0-593の一部をクラウドストレージからダウンロードできます:https://drive.google.com/open?id=1XRa3jdSKj_AmrZNTmGiIFSYFE1KwbCsJ

html    
Drag to rearrange sections
Rich Text Content
rich_text    

Page Comments